FAQ
----------------------------------------------------------------------------------------------------
#1. What changes can you make to customize a control unit?
Any of the parameters built into the control unit can be customized to meet user requirements.
The most common program customization requested is a change to the time sequences built into the control unit. This is usually done to meet particular qualification timing requirements. This is a very simple change to make to the program. We can also change the sequence of the time selections. For example, the time values do not have to be programmed in numerical order. It is possible to enter the sequence of time values in the order they will be used during qualification rather than in order of numerical value.
Occasionally we will be asked to program a very unusual set of time sequences such as 1/10 second increments. This is usually for some type of competitive shooting.
If you have any ideas to customize a control unit just contact us. Some of the best ideas come from our users.
-------------------------------------------------------------------------------------------------
#2. How does your target system compare with a computer based system?
The Shooting Partner target system can perform nearly all of the functions of a computer based target system with less complexity, easier operation and at less cost.
a) The Shooting Partner control unit is easier to use than the keyboard of a computer based target system. The Shooting Partner control unit keypad is specifically designed to operate a target system and so it easy to learn and use. Would you think a computer keyboard would be a good way to operate a cell-phone or an I-pod? Then why would you choose a keyboard to control a target system?
b) The Shooting Partner control unit has a built in control program. The control unit does not "crash" as does a computer system.
c) The Shooting Partner control unit does not require a mains power supply as does a computer based system.
d) The Shooting Partner target system costs less to purchase since no computer is required for operation.
e) Since the Shooting Partner control unit provides portable, wireless, operation the job of the instructor is made easier and more effective. The instructor is on the firing line where he/she can provide improved safety supervision and improved instruction.
-------------------------------------------------------------------------------------------------
#3. How many target systems can be operated on a range simultaneously?
We have an installation in operation that uses five target bays simultaneously on one range. The individual bays are very close together. There is no reason that any required number of individual bays could not be operated at one time.
The Shooting Partner control unit has individual system identification actually built into the control program to prevent interference between adjacent target bays. A benefit of this program function is increased reliable range of the control unit transmissions.
------------------------------------------------------------------------------------------------
#4. How much does a system cost?
Of course, it depends. Most of the target systems we provide are at least partially customized and we can supply a broad range of optional equipment so providing an exact average cost figure is difficult. To provide a base-line figure, the cost of the hardware for an eight target, fully portable, system would be about $7,600 as of September 2008. There would be a small additional cost for shipping and a variable charge depending upon how much installation work you would require us to perform. This price does not include the required air compressor and power supply but everything else is included.
For this price you receive the best remote control transmitter available with a customized program to meet your requirements, an eight channel receiver and eight turning targets plus the air-hoses and electrical cables to meet your range layout needs.
You also receive the unseen benefits of our excellent technical advice and customer service.
----------------------------------------------------------------------------------------------------
#5 What are the receiver power supply options?
The power supply chosen for the receiver will really depend upon the firearms range. If the range has convenient mains power available the best choice is to fit a mains operated power supply. This removes the need for rechargeing a battery periodically.
There are two types of mains power supplies available.
a) On a fixed range a fixed mains power supply is usually built into the same weatherproof enclosure as the receiver. This provides a very tidy and easy to use system.
b) With a target system that is required to be portable we can provide a portable mains power supply unit. This consists of a weatherproof enclosure containing the power supply that simply replaces the standard rechargeable battery.
If the range has no mains power available a battery is used to power the receiver. If the battery we recommend is used the battery needs to be recharged quite infrequently - although this will, of course, depend upon how much the range is used. We can also supply a solar panel battery charger unit for use in appropriate locations.
|
